HiModel
LOTUSRC T580 QUADCOPTER --AP/AV BASED ARTF - NEW PROTOCOL
quadcopter:1.ARTF 1)Inertial-based(6DOF IMU) self-stabilization ..." />
, , , , , , Specifications:, , , , , , , , , , , Machine size, , 608 × 608 × 243, , mm, , ±3mm, , Expand size of the largest, , 885 × 885 × 243, , mm, , , , Motor Wheelbase, t, , Diagonal line, the two motor centers wheelbase, , 580mm, , ±3mm, , Propeller, , 1260, positive and negative special paddle, , 12”, , , , Battery, , LiPo 3S 2200mAh 20C, , 1P, , , , Single Weight, , No battery, receiver, load, , 730g, , ±10g, , Take-off weigh, , 3S 2200mAh 1P Battery, receiver, head, , 950g, , standard, , Payload, , Camera card, , ≤230g, , standard, , Maximum power pulled, , Using the standard battery 1P, , 2400g, , , , -, , Maximum payload, , Using the standard battery 1P, , ≤580g, , , , -, , Maximum takeoff weight, , Using the standard battery 1P, , 1800g, , Safety limit, , Flight distance, , Remote control device and battery capacity by the decision, , -, , , , -, , Flight Time, , 3S 2200mAh 1P Battery, receiver, , 12 minutes, , No wind hover, , Wind strength, , ≤4, , Class, , , , -, , , , ,
Features: Main features of the T580 quadcopter:1.ARTF 1)Inertial-based(6DOF IMU) self-stabilization ...5 Reviews
HiModel
CONTROLABLE TILT UNIT FOR LOTUSRC T580 QUADCOPTER
Quadcopter . Controlable ..." />
Width | 11cm |
Height | 7cm |
Total width of the tilt mount | 14.5mm |
Total height of the tilt mount | 15.5mm |
Mounting stick spacing(approximately) | 86mm / 70mm |
Weight | 93g |
, , , , , , Specifications:, , , , , , , , , , , Max camera size it can adopt:, , ,
Features: Controlable Tilt Unit for LOTUSRC T580 Quadcopter . Controlable ...HiModel
CARBON FIBER CONTROLABLE TILT UNIT FOR LOTUSRC T580P+ QUADCOPTER W/2 DIGITAL SERVOS
Quadcopter . Controlable ..." />
Width | 14cm |
Height | 8cm |
Total width of the tilt mount | 18.5mm |
Total height of the tilt mount | 18.5mm |
Mounting stick spacing(approximately) | 97mm / 73mm |
Weight | 146g/ 5.15oz |
, , , , , , Specifications:, , , , , , , , , , , Max camera size it can adopt(approx.):, , ,
Features: Controlable Tilt Unit for LOTUSRC T580P+ Quadcopter . Controlable ...HiModel
FIBERGLASS CAMERA MOUNT FOR LOTUSRC T380 QUADCOPTER
Quadcopter . Includes/Requires: ..." />
Width | 14cm |
Height | 8cm |
Total width of the tilt mount | 11 CM |
Total height of the tilt mount | 5.5CM |
Weight | 25g/ 0.88oz |
, , , , , , Specifications:, , , , , , , , , , , Max camera size it can adopt(approx.):, , ,
Features: Fiberglass Camera Mount for LOTUSRC T380 Quadcopter . Includes/Requires: ...HiModel
REDCON HIBIRD MINI QUADCOPTER W/O TRANSMITTER - DSM2 COMPATIBLE
Body Dimension W*L*H | 100*100*45MM |
rotor to rotor | 120mm |
Empty Quad Weight | 22g |
LIPO Battery Weight | 10g 3.7V/350MA (not included) |
Body and LIPO Weight | 32g |
Input Voltage | 3.7V/350MA (not included) |
Flight Time | about 10min |
, , , , , , Specifications:, , , , , , , , , , , * THIS IS THE DSM2 VERSION, PLEASE MAKE SURE YOUR TRANSMITTER IS DSM2 VERSION., , ,
Features: Special Feature: Now you can use your own JR ...HiModel
HOBBYWING SKYWALKER QUATTRO 20A X 4 4-IN-1 SPEED CONTROL FOR QUADCOPTERS
quadcopter ..." />
, , , , , , Specifications:, , , , , , , , , , , , MAX PWM input up to 432Hz, and during real test, it works without any problem with flight controls like DJI which claims with max PWM of 500Hz., , ,
Features: 4-in-1 ESC from famous manufacturer specially designed for quadcopter ...7 Reviews
HiModel
HOBBYWING SKYWALKER QUATTRO 25A X 4 4-IN-1 SPEED CONTROL FOR QUADCOPTERS
quadcopter ..." />
, , , , , , Specifications:, , , , , , , , , , , MAX PWM input up to 432Hz, and during real test, it works without any problem with flight controls like DJI which claims with max PWM of 500Hz., , ,
Features: 4-in-1 ESC from famous manufacturer specially designed for quadcopter ...HobbyKing
HOBBYKING H4 COPTER MULTI-ROTOR QUADCOPTER FRAME 470MM
Weight | 453g (frame only) |
Height | 116mm |
Motor Bolt Holes | 16~25mm |
Specs:, Width:, 470mm (motor shaft center to motor shaft center), Ground clearance:, 72mm (bottom of frame), Required:, Your own 4 channel transmitter and receiver,
The Hobbyking H4 Copter offers the ideal aerial video platform ...5 Reviews
GetFPV
QAV500 FPV QUADCOPTER FRAME V1.2
NOTE | Landing Gear not included! |
GetFPV
TEAM BLACKSHEEP "DISCOVERY" QUADCOPTER
quadcopter is a durable and crash ..." />
,
Details The TBS DISCOVERY quadcopter is a durable and crash ...GetFPV
"DISCOVERY" QUADCOPTER WITH CORE AND 69 CAMERA
,
Details This is a bundle of the TBS Discovery that ...GetFPV
"DISCOVERY" QUADCOPTER WITH CORE AND 69 CAMERA
,
Details This is a bundle of the TBS Discovery that ...GetFPV
TEAM BLACKSHEEP "DISCOVERY" QUADCOPTER
quadcopter is a durable and crash ..." />
,
Details The TBS DISCOVERY quadcopter is a durable and crash ...GetFPV
QAV400 FPV QUADCOPTER FRAME (PRE-ORDER)
Quadcopter is nimble acrobat that ..." />
Weight | 375g (without landing gear) |
AUW | 1165g with 2200mah 4s nanotech lipo, gopro3, flight cam, TX, and CC3D board |
Flight Time | 9 minutes hover with 2200mah 4s nanotech |
Body | G10 |
Booms | Anodized machined Aluminum |
Suggested Props | Graupner 8" E-Props |
Motor Choice | Tiger Motor |
Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as FPV electronics to, Suggested Lipo: 4s 2200mah up to 3300mah. HobbyKing NanoTech Lipos in these sizes fit the frame well in terms of dimensions. Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm, Suggested ESC:, Tiger Motor 18amp ESC,
Details The new QAV400 FPV Quadcopter is nimble acrobat that ...GetFPV
QAV500 FPV QUADCOPTER FRAME V1.2
NOTE | Landing Gear not included! |